You must have an Invoice/RMA number on the outside of your package.

Proper shipping is one of the most important parts of the rust removal process.

NOTE: All fuel must be drained from the tank and the tank MUST be clean and dry prior to shipping.

Keep a fire extinguisher present at all times when working with fuel.

Steps to remove tank:

If there is anything in all my years of working on motorcycles I can tell you that will make your life better… Always use a hand held hammer type impact to remove Phillips and Allen bolts and screws. Otherwise you WILL booger up your pretty bolts and screws. Oh, and blow oil out of bolt holes, so you don’t crack the aluminum cases when reinstalling bolts. Heat is your friend!

Photograph your progress, so you know how to reassemble.

Remove any bodywork needed to allow access to the tank.

Put any bodywork hardware or bolts in a Zip Lock bag for safe storage.

Drain fuel from tank.

Turn off petcock.

Remove petcock knob.

Remove tank mounting bolts.

Remove fuel hose, return line, vent hose and gauge wire.

Carefully remove tank.

Use an old towel, blanket or pillow to support tank upside down.

Remove fuel petcock with bolts and put in Zip Lock bag with knob and screw.

Carefully drain the little bit of remaining fuel out of the petcock hole and into a pan for disposal.

Flush the tank with garden hose using tap water for five minutes and drain.

Put one ounce of Dawn dishwashing detergent or degreaser that wont harm paint into tank and add a gallon of water and shake vigorously for a few munities.

Drain and flush with tap water until all soap is gone and only clean water comes out.

Blow dry with a Shop Vacuum, Hair Drier, and / or Air Line.

Shop vacuums make a good bit of heat and will dry a tank minutes.

Properly package Tank, Petcock in Zip Lock, and fuel cap(s).

Tanks are delicate, be sure to use good packaging practices.

Ship with insurance to:

Attn: RMA #

Electrosonic 4643 Charles Bennett Drive, Jacksonville Florida 32225

Send us the tracking information at sales@electrosonicfuel.com

We will inform you when we receive your tank.

Fedex & UPS Links

https://local.fedex.com/en/packing-services